Spares & Accessories for all makes of HPLC Equipment

     > HPLC Spares Home Page             > Laserchrom Home Page                                                                                         United Kingdom
HPLC Servicing Guides
List of HPLC Instruments
Special Offers

.

Home > Sykam > S5300

 

Sykam S5300 autosampler parts


 

This autosampler is digitally controlled by the Clarity Data System. In its most basic configuration, it is fixed injection volume. Variable injection volume is an optional extra, along with heating and cooling, and sample preparation. It holds two trays, giving a maximum capacity of 120 vials.

It is important that these autosamplers are intalled with the waste pipe from the wash solution lower than the inlet to the inection port, unless the non-return valve is installed in the line. If the Drain bottle for the wash solution is used as the eluent waster reservoir, ensure that there is an air gap around the pipe going through the cap, so that the bottle doesnt not build up pressure, or wash solvent will leak from the injection port.

If using this autosampler with Clarity, you will need the following settings in the autosampler control window: Extra Volume 10, Transfer Segment 5, Air Segment 1-3ul. Valve connections are port 2 to the Pump and Port 3 to the column. the loop goes across ports 1 and 4.

Although manufactured in Germany by Sykam, this pump is own-labelled by several other HPLC manufacturers and sold in their own colours. So if your pump looks the same but in a different colour, it probably is!

A Sykam brochure is available for download from www.laserchrom.com, under New HPLC Equipment. A manual is also available as a pdf file, subject to a £5 handling charge.

To place an order: please email your order to sales@laserchrom.com. You can use Laserchrom or Sykam part numbers.

If a photo of the part is available, you can view it and other information by clicking on the part description.

   
Product Name

Sykam

Part Number

Laserchrom

Part Number

Price
Injection Needle
S000736
 
£111.00
Air Needle
S000737
 
£111.00
Stepper Motor - needle drive
S000742
 
£129.00
Needle drive Belt
S000743
 
£39.00
Stepper Motor X axis
S000782
 
£129.00
Drive belt X axis
S000706
.
£39.00
Stepper Motor Y axis
S000783
.
£129.00
Drive Belt 1 Y axis
S000776
.
£39.00
Drive Belt 2 Y axis
S000777
 
£39.00
Stepper Motor for 3/2 Way valve
S000591
.
£129.00
3/2 Way valve
S000250
 
£129.00
Glass Syringe 500ul
S000677
 
£99.00
Flushing port Complete
S000784
 
£93.00
Injection Valve complete with 20ul loop S6015
S000741
 
£695.00
Rotor Seal S6015
S000738
 
£99.00
Stator assembly S6015
S000785
 
£269.00
Injection Port, including sealing
S000840
.
£51.00
Wash port outlet tube, silicone
S000781
.
£11.00
Sample Tray 1, positions 1-60
S000739
.
£368.00
Sample Tray 2, positions 61-120
S000740
.
£368.00
Power Supply
S000722
.
£59.00
Power line filter
S000723
 
£53.00
TFT Display incl circuit board
S000830
.
£295.00
Motor driver circuit board
S000835
 
£395.00
CPU Circuit board
S000836
 
£269.00
Keypad
S000778
 
£82.00
Transfer capillary
S002223
 
£39.00
PEEK fitting for low pressure connections 1/16"
S000222
 
£5.00
Yellow Ferrule to go with PEEK Fitting 1/16"
S000223
 
£5.00
Glass DRAIN bottle 1000ml
S000816
 
£63.00
Glass WASH bottle 500ml
S000815
.
£30.00